Our Technology
Science Behind Every Drop of Purity
Six distinct purification technologies — each engineered to address a specific water quality challenge. From borewell TDS to municipal bacteria, we have the science covered.
Deep Dive
Explore Each Technology
Click any technology to understand how it works, what it removes, and when to use it.
7-Stage RO — The Gold Standard in Purification
Reverse Osmosis forces water through a semi-permeable membrane with pores as small as 0.0001 microns — removing dissolved salts, heavy metals, bacteria, viruses, and chemical contaminants that other technologies miss.
How It Works
- 1Stage 1 — Sediment Pre-Filter: Removes sand, rust, and large particles (5 micron)
- 2Stage 2 — Activated Carbon Block: Eliminates chlorine, VOCs, and odour
- 3Stage 3 — Carbon Pre-Filter: Secondary chlorine and chemical removal
- 4Stage 4 — RO Membrane (0.0001µm): Removes TDS, heavy metals, fluoride, nitrates
- 5Stage 5 — Post Carbon Filter: Final taste and odour polishing
- 6Stage 6 — Mineralizer: Adds back essential Ca, Mg, K minerals
- 7Stage 7 — UV Sterilizer: Final kill of any residual microorganisms
Technical Specs
Key Advantages
- Removes 97% of dissolved solids
- Eliminates heavy metals (lead, arsenic, mercury)
- Reduces fluoride and nitrates
- Suitable for high-TDS borewell water
- Proprietary membrane lasts 3x longer
Side-by-Side
Which Technology Do You Need?
Different water problems need different solutions. Use this guide to find the right technology for your water source.
| Capability | RO | UV | UF | Softener |
|---|---|---|---|---|
| Removes Dissolved Solids (TDS) | ||||
| Kills Bacteria & Viruses | Bacteria only | |||
| Removes Heavy Metals | ||||
| Removes Hardness (Scale) | Partial | |||
| Retains Beneficial Minerals | With mineralizer | |||
| Zero Water Waste | Near zero | |||
| No Electricity Needed | Valve only | |||
| IoT Monitoring Available | ||||
| Best For | Borewell / High TDS | Municipal water | Low TDS municipal | Hard water areas |
Smart Intelligence
IoT Architecture — How It All Connects
Embedded Sensors
TDS probe, flow meter, UV intensity sensor, and pressure gauges built directly into the purifier housing.
Edge Processing
On-device microcontroller processes sensor data locally — no cloud dependency for core alerts.
Encrypted Cloud Sync
256-bit AES encrypted data transmission to AquaTech Pro cloud. 12 months of history stored.
Smart Alerts
AI predicts filter replacement 2 weeks in advance. Push, SMS, and email notifications.
Innovation Lab
20 Years of Water Science
Our 15,000 sq ft R&D centre in Gurugram houses 40+ water scientists and engineers continuously improving membrane technology, IoT firmware, and purification chemistry. Every product is tested against 200+ water quality parameters before launch.
Ready to find the right technology for your water?
Our experts will test your water and recommend the exact combination of technologies you need.